Skip to content
All your boat's data. One app. Your chartplotter, wherever you go.
Smartboatia turns your phone or tablet into a powerful chartplotter. Use it alongside your existing setup or as your main navigation solution.
Why it matters
The intelligent centre on board.
Wind at the masthead, depth at the transducer, position from GPS: data is created all over your boat, each on its own display. Keeping the overview means looking in five places at once.
Smartboatia gathers everything, processes it and makes it readable everywhere. The devices around it stay displays. The boat is what gets smart.
What Smartboatia takes off your hands
Gathered from the boat, made readable everywhere.
The Hub reads what is already aboard and brings its own sensors where something is missing. One data picture, the same on every device.
Gathered from the boat
What the Hub reads
- Position & course, logged continuously
- AIS targets, from your onboard AIS
- Wind, Speed & depth straight from the bus
- Heel, motion & pressure, from the Hub’s own sensors
Made readable
Where you read it
- On your phone or tablet, in the app, live
- On the plotter, as backup over NMEA 2000
- Synced live, the same across every device
- A display to spare, if one fails, another takes over
Live on deck
Your instruments. In your hand, not at the console.
At the helm, in the cockpit, below deck or comfortably tucked into your bunk, your boat's live data is always with you. No running back to the chartplotter. Just a quick glance at your phone or tablet.
Smartboatia team
"We never planned to build a chartplotter. But after countless conversations with sailors, one request kept coming back: "Can Smartboatia navigate too?" So we listened, and turned the data we already had into a complete navigation experience."
How it works
How you navigate is up to you.
The Hub brings its own sensors and also reads what is on the onboard network. No matter where you are on board, your boat's live data is just a glance away.
App-only
Without a Hub
Get started with no hardware: charts (USA), GPS tracking, live position and AIS straight on your phone. Ready at once, no investment.
App + Hub
The full setup
Hub aboard, app as your primary display. Own sensors plus NMEA 2000 data from the boat, all in one app, live and in sync.
Hub → plotter
Chartplotter Plus
Already have a B&G, Garmin, Raymarine or Simrad? The Hub feeds backup data over NMEA 2000. The plotter stays a display; the boat gets smart.
Fits your boat
Runs with what is already aboard.
From sailing yachts to bluewater cruisers. The Hub connects to your onboard network, reads available data and adds its own sensors where needed.
Protocols
- NMEA 2000 INPUT & OUTOUT
- NMEA 0183 VIA GATWAY
- *Legacy NMEA 0183 devices require a compatible NMEA 0183-to-NMEA 2000 gateway.
What the Hub brings
- Heel & motion SENSOR
- Battery voltage SENSOR
- Air pressure SENSOR
- GPS position SENSOR
Read from the bus
- AIS BUS
- Wind speed & direction BUS
- Water depth BUS
- Water temperature BUS
- Built into the Hub SENSOR
- Your own instruments, read from the NMEA network BUS
For sailors and motorboaters alike
With a plotter or without: your boat gets a data picture that is the same everywhere.
Pairs well with
All your boat’s data, in one place.
Connect your Hub and monitoring runs from the very first night at the dock, all on its own.